HL incident on 2010-10-08 — TX

Operator
Enterprise Products Operating Llc
Cause
Equipment Failure
Commodity
Refined And/or Petroleum Product (Non-Hvl) Which Is A Liquid At Ambient Conditions
Program
HL
Damage and Injuries
0 fatalities 0 injuries
Property damage (nominal)
$0
Incident datetime
2010-10-08 05:30
Report number
Location
TX
Narrative
Swedgelock fitting was installed incorrectly. 7-18-2011 update - on 10/08/2010 at 05:30, operator discovered a tubing leak on the p62 line at the beaumont terminal. Leak was the result of incorrect tubing installation. The ferrel was installed backwards on the 1/2 inch tubing. Swagelok representatives have been requested to give formal training on tube fitting installation. Employees and contractors are required to use feeler gauge when doing fitting installation. This will be stated in any job plan, if applicable. The enterprise oq committee (which reviews the current task list for gas and liquids) will consider this maintenance activity to be included in the covered task program. The next meeting scheduled for the enterprise oq committee is in the first quarter of 2012 .
Detailed record list
Report Received Date
2010-12-06 00:00:00
Iyear
2010
Report Number
20100277
Supplemental Number
20631
Report Type
Supplemental Final
Operator Id
Name
Enterprise Products Operating Llc
Operator Street Address
1100 Louisiana Street
Operator City Name
Houston
Operator State Abbreviation
TX
Operator Postal Code
77002
Local Datetime
2010-10-08 05:30:00
Location Latitude
Location Longitude
Commodity Released Type
Refined And/or Petroleum Product (Non-Hvl) Which Is A Liquid At Ambient Conditions
Commodity Subtype
Diesel, Fuel Oil, Kerosene, Jet Fuel
Unintentional Release Bbls
100
Intentional Release Bbls
0
Recovered Bbls
80
Fatality Ind
No
Fatal
0
Injury Ind
No
Injure
0
Accident Identifier
Local Operating Personnel, Including Contractors
Operator Type
Operator Employee
Incident Identified Datetime
2010-10-08 05:30:00
System Part Involved
Onshore Terminal/tank Farm Equipment And Piping
On Off Shore
Onshore
Shutdown Due Accident Ind
No
Shutdown Explain
This Involved A Sample Point Off The Mainline
On Site Datetime
2010-10-08 05:30:00
Nrc Rpt Datetime
2010-10-08 08:30:00
Nrc Rpt Num
Ignite Ind
No
Explode Ind
No
Num Pub Evacuated
0
Pipe Fac Name
Beaumont Terminal
Segment Name
P-62
Onshore State Abbreviation
Tx
Onshore Postal Code
77705
Onshore City Name
Beaumont
Onshore County Name
Jefferson
Designated Location
Milepost/valve Station
Designated Name
Mp 0
Federal
No
Location Type
Totally Contained On Operator-Controlled Property
Incident Area Type
Aboveground
Incident Area Subtype
Typical Aboveground Facility Piping Or Appurtenance
Crossing
No
Pipe Facility Type
Interstate
Item Involved
Tubing
Installation Year
Unknown
Material Involved
Material Other Than Carbon Steel
Material Details
Stainless Steel
Release Type
Other
Release Type Details
1/2" Swedge Lock Tubing On The Out Going Pig Barrel On The P-62 Developed A Leak, Under Investigation. Connection Was Made Up Wrong.
Wildlife Impact Ind
No
Soil Contamination
Yes
Long Term Assessment
No
Remediation Ind
Yes
Soil Remed Ind
Yes
Water Contam Ind
No
Could Be Hca
Yes
Commodity Reached Hca
No
Est Cost Oper Paid
0
Est Cost Gas Released
2000
Est Cost Prop Damage
0
Est Cost Emergency
0
Est Cost Environmental
260519
Est Cost Other
0
Prpty
262519
Accident Psig
1250
Mop Psig
1440
Accident Pressure
Pressure Did Not Exceed Mop
Pressure Restriction Ind
No
Pipeline Function
> 20% Smys Regulated Transmission
Scada In Place Ind
Yes
Scada Operating Ind
Yes
Scada Functional Ind
Yes
Scada Detection Ind
No
Scada Conf Ind
No
Cpm In Place Ind
Yes
Cpm Operating Ind
Yes
Cpm Functional Ind
Yes
Cpm Detection Ind
No
Cpm Conf Ind
No
Investigation Status
No, the operator did not find that an investigation of the controller(s) actions or control room issues was necessary due to: (provide an explanation for why the operator did not investigate)
Investigation Status Details
This was equipment failure
Employee Drug Test Ind
No
Contractor Drug Test Ind
No
Cause
Equipment Failure
Cause Details
Defective Or Loose Tubing Or Fitting
Eq Failure Type
Defective Or Loose Tubing Or Fitting
Additional Installation Ind
Yes
Preparer Name
N*** B******
Preparer Title
Sr. Pipeline Compliance Specialist
Preparer Email
W********@e****.com
Preparer Telephone
713-381-3536
Preparer Fax
713-803-1354
Prepared Date
2015-07-29 00:00:00
Authorizer Name
N*** B******
Authorizer Telephone
713-381-3536
Authorizer Title
Sr. Pipeline Compliance Specialist
Authorizer Email
W********@e****.com
Narrative
Swedgelock fitting was installed incorrectly. 7-18-2011 update - on 10/08/2010 at 05:30, operator discovered a tubing leak on the p62 line at the beaumont terminal. Leak was the result of incorrect tubing installation. The ferrel was installed backwards on the 1/2 inch tubing. Swagelok representatives have been requested to give formal training on tube fitting installation. Employees and contractors are required to use feeler gauge when doing fitting installation. This will be stated in any job plan, if applicable. The enterprise oq committee (which reviews the current task list for gas and liquids) will consider this maintenance activity to be included in the covered task program. The next meeting scheduled for the enterprise oq committee is in the first quarter of 2012 .
Report Received Date 2010-12-06 00:00:00
Iyear 2010
Report Number 20100277
Supplemental Number 20631
Report Type Supplemental Final
Operator Id 31618 PHMSA Enforcement
Name Enterprise Products Operating Llc
Operator Street Address 1100 Louisiana Street
Operator City Name Houston
Operator State Abbreviation TX
Operator Postal Code 77002
Local Datetime 2010-10-08 05:30:00
Location Latitude 30.0113 Google Maps OpenStreetMap
Location Longitude -94.057133 Google Maps OpenStreetMap
Commodity Released Type Refined And/or Petroleum Product (Non-Hvl) Which Is A Liquid At Ambient Conditions
Commodity Subtype Diesel, Fuel Oil, Kerosene, Jet Fuel
Unintentional Release Bbls 100
Intentional Release Bbls 0
Recovered Bbls 80
Fatality Ind No
Fatal 0
Injury Ind No
Injure 0
Accident Identifier Local Operating Personnel, Including Contractors
Operator Type Operator Employee
Incident Identified Datetime 2010-10-08 05:30:00
System Part Involved Onshore Terminal/tank Farm Equipment And Piping
On Off Shore Onshore
Shutdown Due Accident Ind No
Shutdown Explain This Involved A Sample Point Off The Mainline
On Site Datetime 2010-10-08 05:30:00
Nrc Rpt Datetime 2010-10-08 08:30:00
Nrc Rpt Num 956387 NRC Report How to search
Ignite Ind No
Explode Ind No
Num Pub Evacuated 0
Pipe Fac Name Beaumont Terminal
Segment Name P-62
Onshore State Abbreviation Tx
Onshore Postal Code 77705
Onshore City Name Beaumont
Onshore County Name Jefferson
Designated Location Milepost/valve Station
Designated Name Mp 0
Federal No
Location Type Totally Contained On Operator-Controlled Property
Incident Area Type Aboveground
Incident Area Subtype Typical Aboveground Facility Piping Or Appurtenance
Crossing No
Pipe Facility Type Interstate
Item Involved Tubing
Installation Year Unknown
Material Involved Material Other Than Carbon Steel
Material Details Stainless Steel
Release Type Other
Release Type Details 1/2" Swedge Lock Tubing On The Out Going Pig Barrel On The P-62 Developed A Leak, Under Investigation. Connection Was Made Up Wrong.
Wildlife Impact Ind No
Soil Contamination Yes
Long Term Assessment No
Remediation Ind Yes
Soil Remed Ind Yes
Water Contam Ind No
Could Be Hca Yes
Commodity Reached Hca No
Est Cost Oper Paid 0
Est Cost Gas Released 2000
Est Cost Prop Damage 0
Est Cost Emergency 0
Est Cost Environmental 260519
Est Cost Other 0
Prpty 262519
Accident Psig 1250
Mop Psig 1440
Accident Pressure Pressure Did Not Exceed Mop
Pressure Restriction Ind No
Pipeline Function > 20% Smys Regulated Transmission
Scada In Place Ind Yes
Scada Operating Ind Yes
Scada Functional Ind Yes
Scada Detection Ind No
Scada Conf Ind No
Cpm In Place Ind Yes
Cpm Operating Ind Yes
Cpm Functional Ind Yes
Cpm Detection Ind No
Cpm Conf Ind No
Investigation Status No, the operator did not find that an investigation of the controller(s) actions or control room issues was necessary due to: (provide an explanation for why the operator did not investigate)
Investigation Status Details This was equipment failure
Employee Drug Test Ind No
Contractor Drug Test Ind No
Cause Equipment Failure
Cause Details Defective Or Loose Tubing Or Fitting
Eq Failure Type Defective Or Loose Tubing Or Fitting
Additional Installation Ind Yes
Preparer Name N*** B******
Preparer Title Sr. Pipeline Compliance Specialist
Preparer Email W********@e****.com
Preparer Telephone 713-381-3536
Preparer Fax 713-803-1354
Prepared Date 2015-07-29 00:00:00
Authorizer Name N*** B******
Authorizer Telephone 713-381-3536
Authorizer Title Sr. Pipeline Compliance Specialist
Authorizer Email W********@e****.com
Narrative Swedgelock fitting was installed incorrectly. 7-18-2011 update - on 10/08/2010 at 05:30, operator discovered a tubing leak on the p62 line at the beaumont terminal. Leak was the result of incorrect tubing installation. The ferrel was installed backwards on the 1/2 inch tubing. Swagelok representatives have been requested to give formal training on tube fitting installation. Employees and contractors are required to use feeler gauge when doing fitting installation. This will be stated in any job plan, if applicable. The enterprise oq committee (which reviews the current task list for gas and liquids) will consider this maintenance activity to be included in the covered task program. The next meeting scheduled for the enterprise oq committee is in the first quarter of 2012 .

All rights reserved. Copyright © by ClearPHMSA